Technology

Computational methods for
propellers, wakes and wings

We develop and test aerodynamic models for early design questions: which configurations merit a closer look, how propeller loads change with operating point, and where the slipstream alters wing loading.

Research framework

AeroPropSim

AeroPropSim estimates loads on isolated propellers and wings exposed to their slipstreams. It connects blade-element momentum theory (BEMT), radial slipstream fields or prescribed helical wakes, and horseshoe vortex-lattice wing aerodynamics.

Implemented
Propeller thrust, torque and radial loading, wing circulation and forces, and one-way propeller-to-wing coupling.
Compared with measurements
Selected propeller benchmarks and PROWIM wing-loading distributions, under the specific tested conditions.
Demonstrated
X-57 clean-wing loading with 12 operating high-lift propellers. The study documents numerical checks, sensitivity and unresolved full-aircraft validation.

Continuing development · Beta

FlexiPropSim

FlexiPropSim combines AeroPropSim’s propulsion methods with the earlier QUISTICITY wing and aeroelastic models. A shared case runner connects geometry, operating conditions, solvers and results for rigid and flexible configurations.

Implemented in the beta
Modular BEMT, a lifting-line propeller solver with a prescribed helical wake, steady and unsteady vortex-lattice wing models, and beam-coupled static and dynamic aeroelastic cases.
Verification & comparison
Regression cases cover propeller, wing and aeroelastic workflows. Selected propeller and wing cases are compared with reference data. The powered X-57 case shows a documented difference between the unified ring model and the earlier horseshoe model, so the published AeroPropSim result remains a separate study.
Experimental
Loading-only tonal noise for isolated propellers using one-way aerodynamic load transfer. Analytic and numerical checks are recorded. Microphone validation, broadband and installed noise remain open.
Research directions
Quantify wake and wing coupling across more configurations, resolve model discrepancies, and extend acoustic validation. More complete reciprocal propeller–wing feedback and combined physics remain research directions.

Numerical methods

How a propeller changes wing loading

The one-way aerodynamic workflow passes a wake field from the propeller model to the wing model. Each stage has inputs and outputs an engineer can inspect.

  1. Propeller geometryBlade chord, twist, RPM and inflow
  2. Propeller aerodynamicsSection loads from BEMT or lifting line
  3. Wake representationRadial slipstream or prescribed vortex field
  4. Wing interactionLocal inflow into a vortex-lattice model
  5. Engineering outputsThrust, torque and spanwise wing loading

Use reduced-order models to explore

Compare layouts and operating points, inspect loading trends, and choose the cases that warrant more detail. Check convergence and sensitivity to assumptions.

Use higher fidelity and tests to resolve

Investigate viscous separation, complex interference and detailed pressure fields with suitable CFD or experiments. Compare like-for-like configurations and conditions.

Intelligent engineering workflows

AI assists the engineering workflow

We use AI to assist scientific programming, research, documentation, test preparation and review. Our development direction includes more automated simulation setup and parameter sweeps, better organisation of run data, and tools that help engineers compare and interpret results.

Physics determines the engineering model. Computation produces the evidence. Engineers review generated code, verify numerical outputs and remain responsible for engineering decisions.

Discuss a technical challenge